MD719/
1369
ELECTRIC CHRISTMAS TRAIN
INSTRUCTION MANUAL
- Please read the Operating instructions carefully before handling the little LED-light-
emitting train.
- Please keep carefully the instruction manual for future reference.
- When you submit this article to third parties, give him the present instruction
manual.
A. PRODUCT DESCRIPTION
Locomotive (x1)
Carriage A (x1)
Carriage B (x1)
Carriage C (x1)
Tracks (x8)
B. BATTERY INSTALLATION
Unscrew the
screw which is
to the back on
the locomotive
on the battery
compartment
cover.
Then, press black
tab to remove the
cover
Insert 2 batteries AA/
LR06 as indicated
inside the battery
box.
Reset the cover as
indicated on the
above drawing.
Screw the battery
cover back into
place. And be sure
that the screw has
been properly
tightened.
C. CIRCUIT SETUP
- Before proceeding to the setting up tracks, be sure that the floor surface is perfectly flat. The
circuit board must be placed on a clean stable flat surface, dust-free and non-fibrous (ex.
carpet fibers) so that the train can easily run straight through.
- If you mount the circuit on a table, be sure that the tracks are not closen to the edge of this
table. Because the cars could derail and fall in the empty space.
Before inserting batteries, insure that the train is off (reset the switch to the
OFF position).
English
