![background image](http://html1.mh-extra.com/html/eurotops/29261/29261_instruction-manual_2440845001.webp)
EP623 Autonomous security alarm with radar motion detector
Instruction Manual
DESCRIPTION
This multi-functional alarm is equipped with radar technology that will detect
movement even through a door or wall, which can secure your home, garage,
office building, shop, hut, camping car etc. In your absence against malicious
"stalkers".
Alarm Unit
The alarm unit can be powered via the adapter provided on the mains or via 8 AA batteries not supplied.
If mains power is not available, power the unit with batteries (for example, to secure your vehicle,
camping, car, tent, etc.). To insert the batteries, proceed as follows:
•
Remove the battery compartment cover on the back of the alarm
unit.
•
Insert 8 AA batteries (not supplied), 1.5V with correct polarity.
Note: It is strongly advised to insert the batteries even if the unit is plugged
into mains. This will allow the alarm to continue to function in the event of
a power failure.
Remote control
•
Remove the battery compartment cover on the back of the remote
control by pulling it upwards.
•
Insert the supplied 3V CR2032 battery with the positive terminal facing
up.
Note: Remove the batteries if you do not use them for a long time.
USE
When the alarm unit is energized, the "Power" LED and the "ARM" LED light up. The alarm is armed. A
few seconds later you will hear the doorbell which is the default alarm sound.
•
Press the "ON / OFF" button on the alarm unit or on the
remote control to activate or deactivate the alarm. When
the "ARM" LED lights up, the alarm is armed. When the
"ARM" LED goes out, the alarm is disarmed.
•
Press the "Select" button to select 3 alarm sound modes:
-
Realistic watchdog bark in 3D: The "Wow! Wow ! " of
a dog sounds.
-
Alarm of police siren.
-
Doorbell: The "Ding-Dong" of a doorbell sounds.
Then press the "VOL +" or "VOL-" buttons to adjust the sound intensity from 70 to 120 DB.
•
When the alarm is armed, the radar detector will detect human movement and instantly trigger the
alarm. Any new motion detection will trigger the alarm again.
INSTALLATION