Eurotherm TC3001, Руководство пользователя

Страница: 40 / 79

Transit Inspector Pro 41
Administrating Module
User Guide
4.3 Configuration Examples
4.3.1 Standalone Configuration
Figure 28 : Object tree for standalone configuration
1. Open Computer object properties (see SecurOS Administration Guide ) and setup the following
parameter:
• Disks to store archive → set
Read/Write
access for video for at least one hard disk (e. g.
for
C
).
2. Create Video Capture Device object (see SecurOS Administration Guide ).
3. Create Camera object with the following parameters:
•
Channel number
→
set the actual number of the labeled BNC connector the first camera
is attached to.
•
Resolution
→ set
High (CIF2)
value.
•
Pre-recording phase duration
→
set approximate train passing time (s) by camera view.
www.isscctv.com