Transit Inspector Pro
16
Deploying Module
User Guide
Sensors have adjustable parameters, e. g. object speed on ray crossing, angles of inclination. This and
other parameters can be changed on beam control and are defined in working process.
3.2.6.2
Multi-beam Sensors
As an additional precaution of on carriages devision multi-beam sensors are used.
There are carriages that have broken power chassis, e. g. grain and carriers, tank-trucks. In this case
a wrong triggering can be. To avoid such situations use multi-beam sensors. So there is “carriage is
present” state on one of six ray triggering. If there are no triggering then the two states is possible:
“carriage is absent” or “inter-carriages distance”. However the first state is defined by time.
Warning!
For the case do not use IR sensor as it has delays on triggering and alarm signal
delivery.
Use fast-acting industrial IR or laser sensors of wide temperature interval, e. g.
Connect 3
(series
W
18-3 WS/WE 18-3
) photovoltaic sensors.
3.2.6.3
Setting Sensors to Define Inter-Carriages Distance
Sensors set on contact system or on additional bearings at a height of 3 meters. The distance between
reciever and transmitter must be more than 10 meters, but less than 120 ones.
Warning!
The sensor seat has to be submitted to railway government.
3.3
Installing Server Application
This section describes Module software installation on a SecurOS network computer.
3.3.1
Installation Procedure
1. Insert the CD disc containing Module software into the CD-ROM drive.
Launch the
Install.exe
file.
The language dialog will appear. Select the language which will be used during the installation
process, and click the
OK
button. TheSetup Wizard window will be displayed (see figure
Setup Wizard will guide you through a number of screens to gather all the required information
prior to copying any files, so you can quit Setup Wizard and cancel the procedure at any step
without consequences. You can also go back to any previous step to alter settings by clicking
Back
button. Click the
Next
button to continue.
When I start Transit Inspector Pro setup, an information dialog “Another copy of SecurOS Transit
Inspector Pro detected on this computer. . . ” What does it mean?
www.isscctv.com
Содержание TC3001
Страница 1: ...User Guide ...
