100/180 MM GRAPHICS RECORDER: USER GUIDE
User Guide
Page 91
HA261742
Issue 16 Nov 04
4.4.1 ACCESS LEVELS (Cont.)
ACCESS WHEN:
Allows an access level or an individual user name to be selected from a pick list.
NEW PASSWORD/RETYPE PASSWORD
For all levels except Logged Out, these fields allow a new password to be entered for the selected access level or
User. The password must be entered in the 'Re-type Password' field. If the two differ, a warning message (Passwords
did not match) appears when the APPLY key is operated, and password entry must be repeated. If the password does
not comply with the minimum length requirements in Security Management (if fitted) (
sage (Invalid Password) appears when the 'Apply' key is operated, and password entry must be repeated.
CONNECT FROM REMOTE
Enabling this field, calls the Remote user name and Remote user password entry boxes.
REMOTE USER NAME/PASSWORD
These two entry boxes allow user name and password to be entered for use by the remote host operator. The remote
user will be able to access the recorder configuration according to the other access permissions enabled in this page.
The password must be entered twice to ensure integrity.
To allow unrestricted view-only to the host, 'Logged out' permission level should be selected and then a user name of
‘anonymous’ entered, and the password field left blank.
Notes:
1.
Remote login will be refused if the user account is disabled for any reason.
2.
For maximum security, it is recommended that the remote password and the 'local' password are non-
identical.
LOGIN DISABLED
For all levels except Logged Out, This allows any one or more of the access levels to be removed from the 'Access
when' picklist.
Note: This feature should be used with discretion, or the situation might arise in which the recorder cannot be
logged onto, either at a particular access level or at all. It is recommended that at least one user with Engi-
neer-level access is retained with login enabled, or it may become necessary to return the recorder to the
manufacturer, or to arrange for a service visit.
Auditor Pack notes:
1
If the Auditor Pack option is fitted, and the number of Password Retries is exceeded the relevant login is
disabled. A user with Engineer level access can re-enable the login.
2.
If the Auditor Pack option is fitted, and the Password Expire time has been exceeded, all logins are
disabled. In order to reconfigure the recorder, it is necessary to use the Service password - please contact
the recorder supplier or the nearest service centre for advice.
EDIT OWN PASSWORD
Allows each user, with this permission enabled, to edit his/her password.
CHANGE ALARM SETPOINTS
Allows each user with this permission enabled, to edit alarm parameters under Configuration/Channel
ACKNOWLEDGE ALARMS
Allows each user with this permission enabled, to acknowledge alarms
