manualshive.com logo in svg

Eurotherm 5100V, Руководство пользователя

Поделиться
Скачать
Eurotherm 5100V Скачать руководство пользователя страница 55

100/180 MM GRAPHICS RECORDER: USER GUIDE

User Guide

Page 51

HA261742
Issue 16  Nov 04

4.2.6  Export screen

This field appears only if the User Screens option (section 2 of the Options Manual) is fitted, and allows a User
Screen to be exported to disk or Flash memory.  The exported screen can subsequently be imported either into this
recorder or into a different recorder.

4.2.7  Import User Linearisation 

The Import Linearisation feature allows linearisation tables to be imported either via the floppy disk or pc card, or if
the Remote Viewer option is fitted, directly from the host PC.

Touching the User Linearisation field allows the user to select which of 'UserLin1' to 'UserLin4' is to contain the im-
ported file.

Touching the File Name field, calls a popup menu similar to that shown in figure 4.2b. This allows the user to select
the table to be imported.

The file must be comma separated ASCII as follows:
n,
X1,Y1
X2.Y2
X3,Y3
    .
    .
Xn,Yn
where 'n' is the total number of XY pairs in the table, and or each pair, X is the input value, and Y is the linearised
value corresponding to X.  See

 section 4.3.9

 for full details.

Note:  Imported linearisation tables will not become effective until after the next configuration 'Apply'
operation

4.2.8  Export User Linearisation 

Similar to 'Import user Linearisation', above, the Export Linearisation feature allows linearisation tables created in the
recorder to be exported either via the floppy disk or pc card, or if the Remote Viewer option is fitted, directly to the
host PC.  See 

section 4.3.9

 for full details.

4.2.9  Import printer driver

This field appears only if the ASCII Output Printer option is fitted.

Similar to 'Import user Linearisation', above, this allows driver (.uhi) files for new printer types to be imported either
via the floppy disk or pc card, or if the Remote Viewer option is fitted, directly from the host PC.  See section 5 of the
Communications manual for further details.

Note:  Imported printer drivers do not become effective until after the next configuration 'Apply' operation.

User Linearisation

File Name

Import

1) UserLin1

userlin

Содержание 5100V





































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды