manualshive.com logo in svg

Eurotherm 5100e, Руководство пользователя

Поделиться
Скачать
Eurotherm 5100e Скачать руководство пользователя страница 92

100 MM GRAPHICS RECORDER: USER GUIDE

HA027271

Issue 12  Mar 04

User Guide
Page 88

4.6.5  ABOUT (Cont.)

SUPPORT FILE 

If the unit is not performing as it should (e.g. it resets itself unexpectedly), the Support File key allows the user to
save 'critical system files' into a single file (SupportInfo.uhq*) to the instrument's floppy disk/pc card, or to the remote
viewer's PC, for despatch to the manufacturer for analysis. For security reasons, this file cannot be viewed by anyone
other than the manufacturer or his agents.

Once the save operation is complete, a 'Support' message appears on the screen giving details of where to send the
file.  More information is held in the file 'SupportInfo.txt' which is also saved to the disk.  This file can be opened, and
the information within it read, by inserting the disk into a PC, clicking on the floppy disk icon (A drive) in 'My Com-
puter' and then double clicking on the file icon when it appears.

* 'SupportInfo' is the default name.  This name may be edited by the user before saving to disk or pc. The .uhq suffix
is automatically appended to the new name.

CLEAN \USER FOLDER

Notes:
1.

This button appears only for users with 'Full Configuration' access permission.

2.

Before carrying out this operation, it is recommended that all required files are saved to disk, or pc card.

Operating this button causes the instrument to delete 'unnecessary' files from the \user folder, and to compress (zip)
others such as user screens.  Permission is asked before configuration files, user screens etc. are deleted.

Once all deletions are complete, a list of deleted items is displayed.

Note:  'Yes  to All'  applies  only  to  'remaining'
files.  It does not delete files for which delete
permission has previously been denied by op-
eration of the 'No' button.

Warning

Items on the user folder may be deleted.
Do you wish to continue?

Yes

No

Config File

Yes No Yes to All

Deleting config.uhz
Thu Feb 05 09:53:08 GMT 2004
Are you sure?

Deleted Files:

\user\setup.log

\screen_3

\screen_4

userlog2.log

errorlog.txt

7473 Bytes freed.

Ok

Содержание 5100e









































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды