manualshive.com logo in svg

Eurotherm 5100e, Руководство пользователя, Страница: 23 / 136

Поделиться
Скачать
Eurotherm 5100e Скачать руководство пользователя страница 23

100 MM GRAPHICS RECORDER: USER GUIDE

User Guide

Page 19

HA027271
Issue 12  Mar 04

3.2.1  KEY FUNCTIONS (Cont.)

MESSAGE LOG 

The Root menu/Goto View/Message log key calls the first Message Log page for the current group to the screen, as
shown in figure 3.2.1c, below.  Alternatively, Message Log can be selected from the Alarm & Message options menu,
(

section 3.1.3

) and in this case, if there are multiple groups, the user selects a 'Group' for the Message Log display

from a pop-up (Goto Group) menu.

If there are more messages than can be displayed in the height of the screen, a scroll bar appears to allow 'hidden'
messages to be displayed.

Messages are retrieved from the history files in batches of 100 messages.  If there are more than 100 messages, 'Ear-
lier messages..' appears after the hundredth message.  Touching 'Earlier messages..' calls the option menu, and touch-
ing 'Earlier messages..' in this menu, calls the next batch of 100, and so on.  If applicable, operating  'Later messages..'
/ 'Later messages..' calls the previously displayed 100 messages.

As can be seen from the figure, the list of messages can be 'filtered' both by type and by time.  For example, setting
the message type to 'Alarm' and the period filter to 'Last Day'  excludes all messages except alarm messages which
have occurred within the previous 24 hours.

Figure 3.2.1c  Message log page showing message-type picklist

MESSAGE TYPE FILTER
All Messages All messages are displayed
System

Only system messages and instrument alarms are listed.

Alarms

Only alarm on/off and acknowledgement messages appear.

Power Up

Displays power up messages only including Config revision and Security revision are included.  See 

section

4.6.5

 for more details.

General

Displays messages sent via Modbus, and operator notes/custom messages etc. If the e-mail option is fitted, a
mesage is generated each time an e-mail is sent.  See section 11 of the options manual for details of the e-
mail option.

Batches

Not supported by this recorder version

Logins

Not supported by this recorder version

Signings

Not supported by this recorder version

Audit trail

Not supported by this recorder version

Engineer

Group Name

13:36:25

28/01/04

All Messages

All History

28/01/04 11:19:57 Maths Channel Failure

28/01/04 11:19:57 Power Up

28/01/04 10:55:36 Alarm(s) Ackd 2(1) 2(2)

28/01/04 10:48:14 Alarm(s) off 2(1)

28/01/04 10:39:03 Alarm(s) off 1(1)

28/01/04 10:20:16 Engineer,Overheat on turbine - system..

28/01/04 10:19:57 Alarm(s) on 1(1)

28/01/04 10:10:42 Alarm(s) on 2(1)

28/01/04 09:09:12 Maths Channel failure

28/01/04 11:19:57 Power Up

System

Alarms

Power Up

General

Batches

Logins

Signings

Audit Trail

All Messages

Содержание 5100e









































































































































Отзывы:

Нет отзывов