Eurotech ZYPAD ZRS-1D, Руководство пользователя

Страница: 9 / 42

ZRS-1D User Manual 9
Tested to Comply with FCC Standards
The ZRS-1D has been tested to, and complies with, part 15 of the FCC rules.
Operation is subject to the following two conditions:
1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may cause
undesired operation.
Emissions information for Canada
This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numérique de la classe
B est conforme à la norme NMB-003 du Canada.
CE Marking
CE Marking:
This equipment is compliant to the requirements for CE marking
when used in a residential, commercial, vehicular or light
industrial environment.
RAEE
The information below is issued in compliance with the regulations as set out by the 2002/96/CE
directive, subsequently superseded by 2003/108/CE, and refers electrical and electronic equipment
and the management of their waste (WEEE)
When disposing of a device, including all components, subassemblies and materials that are an
integral part of the product, the WEEE directive is taken into consideration.
IT08020000000680
This symbol will be attached to the equipment or, in the case that
this is not possible, on the packaging, instruction literature and/or
the guarantee sheet. The use of this symbol states that the device
has been marketed after August 13th 2005, and implies that you
must separate all of its components when possible, and dispose of
them in accordance with local waste disposal legislations.
•
Because of the substances present in the equipment, improper use or disposal can cause
damage to human health and the environment.
•
With reference to RAEE, it is compulsory not to dispose of the equipment with normal urban
refuse; arrangements should be made for separate collection and disposal.
•
For detailed recycling information, contact your local waste collection body.
•
In case of illicit disposal, sanctions will be levied on transgressors.
ROHS
This device, including all of its components, subassemblies and the consumable materials that are
an integral part of the product, have been manufactured in compliance with the European directive
2002/95/CE known as the RoHS directive (Restrictions on the use of certain Hazardous Substances).
This directive targets the reduction of hazardous substances previously used in electrical and
electronic equipment (EEE).