Eurotech DynaGATE 10-06, Руководство пользователя, Страница: 63 / 72

DynaGATE 10-06 User manual Rev. 0-8 12 How to install the product
12 H
OW TO INSTALL THE PRODUCT
The product is intended for professional use and must be installed by qualified personnel only.
The product must be installed in a secured location, accessible to authorized personnel only (for
example in a cabinet / technical compartment).
12.1 Comply with safety instructions, norms and certifications
Always comply with the information and instructions contained in the following sections:
l
"Safety instructions" on page 7
12.2 How to install the product
To install the DynaGATE 10-06, complete the following steps:
1. See "Mechanical specifications" on page 61
2. Add all the necessary mounting hardware to safely secure the product in place according to your
installation requirements (for example use 4x M6 screws, with a minimum length of 15 mm).
Material and length of the screws, and the maximum torque applicable, depend on your installation
requirements.
In case of uncertainties contact the Eurotech Technical Support Team. For more information see "How to
receive technical assistance" on page 13 .
63 / 72