Winner Analog GSM Fax User Manual
www.eurotech-communication.com
9
Available options:
1. Disable: - Don’t ignore any digits.
2. 0 to 9: - Set the specific digit to be ignored (at the start of the dialed number).
3. Any: - Any first dialed digit will be ignored.
7. Software Version
Indicates the software version.
8.Data Mode :
Data mode on / Data mode off
This parameter allows the user to transmit digital data over the GSM. An 8 pin serial data cable has
to be connected to the serial port(Comport) off the PC on one side and on other side the RJ45.
Once Data Mode “ON” setting has been done ( Enter main menu
"
* * *
">>> Browse to the data mode
menu "
#
" >>> Enter data mode and choose “ON”"
*
") the HyperTerminal has to be accessed.
Make sure the setting the HyperTerminal is as follows:
1)
Open the HyperTerminal on 192OO frequency. This Enables you to send AT Commands/Data.
Note: This parameter must be OFF when being used for 'Voice' only!
9.Pre Digit Dialling:
Allows you to transmit a prefix using an ordinary phone:
This parameter allows you to attach a series of digits (i.e. O5O) to every number dialed i.e. your cell phone
prefix number. Every time you dial a number this prefix will be added automatically.
* This attribute can save valuable dialing time.
1)
Press "*" to reach the sub menu, the LCD will indicate "# - Change / * - Exit". After a short delay the
LCD displays: "String: ".
2)
Press
"#"
and write your prefix -- ie. “O5O” then press
"*"
until the LCD display returns to "
9.
Pre_Dialling
".
10. CID:
(Setup Caller ID) Caller I.D option
This parameter is
Optional,
and can be obtained
by special order only
.