Document ID: 39080005
Rev: A
Technical Support: 1-800-626-6912
Page 9 of 20
P
ORTABLE
S
PA
O
PERATING
I
NSTRUCTIONS
E
LECTRICAL
O
UTLET
Your Petite Spa
™
should be conveniently located near adequate utilities during use. A 115v, 60hz GFCI protected outlet
must be used. Do not operate the pedicure spa without GFCI protection. The Petite Spa
™
is also available in a 100v and
220v version. Warning: Do not use extension cords with the pedicure spa.
F
ILLING AND
R
UNNING THE
P
ETITE
S
PA
Replace the faucet aerator with the faucet adaptor included in the
hose kit.
Screw the white quick connect adaptor into the blue female hose.
Connect the adaptor to the faucet by sliding the white sleeve down
while sliding the connector onto the faucet adaptor.
The discharge valve is located at the bottom of the spa.
Make sure
that the valve is closed before filling with water
.
The discharge valve is closed when the valve handle is horizontal.
Fill the spa with warm water. It is not recommended that the water
temperature exceeds 105 degrees F.
Fill the tub with water up to the desired line on the back tub wall.
The on/off button is located on the front of the unit. Push the left side
of the switch once to start the spa, push it again to stop the spa.
6
