00047100.DOC, Version 1.0
10/11
Please use the original packaging if the device is to be transported.
Please consider that unauthorized modifications on the device are forbidden due to safety reasons!
If this device will be operated in any way different to the one described in this manual, the product may suffer
damages and the guarantee becomes void. Furthermore, any other operation may lead to dangers like short-
circuit, burns, electric shock, etc.
INSTALLATION
Mounting
The installation of the device has to be built and constructed in a way that it can hold 10 times the weight for 1
hour without any harming deformation.
Before rigging make sure that the installation area can hold a minimum point load of 10 times the device's
weight.
Do only use appropriate screws and make sure that the screws are properly connected with the ground.
Operation
Connect the connection cable of the power-unit with the AC IN-socket. Plug the power-unit into your outlet.
After you connected the effect to the mains, the LED clock starts running.
You may now set the desired time on the LED clock via the 3 buttons on the back of the device.
Set
button
:
Press to set the apropriate time/alarm.
UP
button
:
This switch moves the time forward.
DOWN
button
:
This switch moves the time backward.
Choosing between the 12/24 hour system:
Before setting the time or alarm, press the “UP” button to choose between the 12 or 24 hour systems.
Setting the time:
Press the “SET” button for three seconds until the „hour“ begins flashing. Press „UP“ or „DOWN“ to increase
or decrease the hour.
After setting the hour, press „SET“ again until the „minutes“ begin flashing. Press „UP“ or „DOWN“ to
increase or decrease the minutes.
After setting the minutes, press „SET“ again to get the “second” setting. Press „UP“ or „DOWN“ to locate the
second LED.
Setting the alarm:
After setting the seconds, press „SET“ to get the alarm function
a1
setting. Press the “UP” or “DOWN” button
to determine if the alarm function is on or off.
If the alarm function is on, press the “SET” button until the „hour“ begins flashing. Press „UP“ or „DOWN“ to
increase or decrease the hour.
After setting the hour, press „SET“ again until the „minutes“ begin flashing. Press „UP“ or „DOWN“ to
increase or decrease the minutes.
