SNOWING CHRISTMAS TREE
9
10. Unfold the branches until you have a beautiful tree shape.
Tip:
In order to have the most beautiful shape, we
recommend to adjust the branches to horizontal.
11. Attach the top. Caution! The top is designed to return the
snowflakes and must be set up horizontally to avoid
snowflakes flying around in an uncontrolled way.
12. Decorate the branches with the ornaments. Make sure they
are properly fixed as falling parts could block the
circulation of the snowflakes. Attach the light chain around
the branches. Connect the connection cable to the
corresponding input jack in the base.
5. Performance check
Adjust the position OFF at the controller. Insert the power unit
into your power outlet (230 V, 50 Hz~).
Distribute some snow flakes into the bottom of the base. Make
sure that no other objects can hinder the snow flake circulation.
Switch the device on via the cable remote control. Check if
snow flakes are snowing from the tree, the lighting chain is lit
and the music plays. If not please check the contructrion and
all connections until everything works satisfactory.
6. Fill in snow flakes
After the performance test, fill the snow flakes into the umbrella
and distribute them evenly. Make sure that no other objects
can hinder the snow flake circulation. Keep some snow flakes
for later.
7
.
Connection to the mains
Connect the cable of the power unit to the power input and the
power unit to a power outlet (230 V, 50 Hz~).
