51799330_V_3_0.DOC
18/33
There are no serviceable parts inside the device except for the lamp and the fuse. Maintenance and service
operations are only to be carried out by authorized dealers.
Please refer to the instructions under "Installing/Replacing the lamps".
Replacing the fuse
If the lamp burns out, the fine-wire fuse of the device might fuse, too. Only replace the fuse by a fuse of
same type and rating.
Before replacing the fuse, unplug mains lead.
Procedure:
Step 1:
Unscrew the fuseholder on the rearpanel with a fitting screwdriver from the housing (anti-
clockwise).
Step 2:
Remove the old fuse from the fuseholder.
Step 3:
Install the new fuse in the fuseholder.
Step 4:
Replace the fuseholder in the housing and fix it.
Should you need any spare parts, please use genuine parts.
If the power supply cable of this device becomes damaged, it has to be replaced by authorized dealers only
in order to avoid hazards.
Should you have further questions, please contact your dealer.
TECHNICAL SPECIFICATIONS
Power supply:
230 V AC, 50 Hz ~
Power consumption:
280 W
Dimensions (LxWxH):
240 x 255 x 170 mm
Weight:
6 kg
Fitting lamp:
Article Nr.:
OMNILUX ELC 24V/250W GX-5,3 50h 50mm
88264005
OMNILUX ELC 24V/250W GX-5,3 500h 50mm
88264105
GE ELC 24V/250W GX-5,3 50h 50mm
88264000
OSRAM ELC 64653HLX A1/259 24V/250W
88264010
PHILIPS ELC 24V/250W GX-5,3 50h 50mm
88264015
PHILIPS ELC 24V/250W GX-5,3 500h 50mm
88264115
Maximum ambient temperature t
a
:
45° C
Maximum housing temperature t
B
(steady state):
90° C
Fuse:
T 2 A, 250 V
Please note: Every information is subject to change without prior notice. 30.11.2005 ©
