51786500_V_1_1.DOC
33/63
Replacing the fuse
If the lamp burns out, the fine-wire fuse of the device might fuse, too. Only replace the fuse by a fuse of
same type and rating.
Before replacing the fuse, unplug mains lead.
Procedure:
Step 1:
Unscrew the fuseholder on the rearpanel with a fitting screwdriver from the housing (anti-
clockwise).
Step 2:
Remove the old fuse from the fuseholder.
Step 3:
Install the new fuse in the fuseholder.
Step 4:
Replace the fuseholder in the housing and fix it.
Should you need any spare parts, please use genuine parts.
If the power supply cable of this device becomes damaged, it has to be replaced by a special power supply
cable available at your dealer.
Should you have further questions, please contact your dealer.
TECHNICAL SPECIFICATIONS
Power supply:
230 V AC, 50 Hz ~
Power consumption:
335 W
DMX-control-channels:
7/9
DMX-512-connection:
3-pin XLR
Flash-rate:
13 Hz
Colour-wheel:
7 dichroic filters and open
Rotating gobo-wheel:
7 gobos and open
Maximum PAN-movement:
360°
Maximum TILT-movement:
250°
Length of base:
300 mm
Width of yoke:
300 mm
Height (head horizontal):
420 mm
Weight (net):
12.5 kg
Maximum ambient temperature T
a
:
45° C
Maximum housing temperature T
B
(steady state):
80° C
Min.distance from flammable surfaces:
0.5 m
Min.distance to lighted object:
0.5 m
Fuse:
F 4 A, 250 V
Accessory:
OMNILUX EHJ 24V/250W G-6.35 50h 3000K
No. 88289005
GE EHJ A1/223 24V/250W G-6.35 50h
No. 88289000
OSRAM EHJ 64655HLX A1/223 24V/250W G-6.35
No. 88289010
EUROLITE DMX Operator 192 Kanal
No. 70064520
EUROLITE DMX Scan Control 192 Kanal
No. 70064525
Wizard-512 USB DMX-So Interface
No. 51860102
Wizard-1024 USB DMX-So Interface
No. 51860110
FUTURELIGHT DES-3 DMX-terminator 3-pin
No. 51834001
Please note: Every information is subject to change without prior notice. 30.05.2006 ©
