background image

 

 

mechanics may be damaged. When choosing the installation-spot, please make sure that the device is 
not exposed to extreme heat, moisture or dust. There should not be any cable lying around. Please 
make sure that the fixture can not be touched or bumped. Your endanger your own and the safety of 
others.   
DESCRIPTION OF THE DEVICE 

 

Features 

> High power 75w white led   
> 50000 hours lifetime and lower power consumption 
> 15 or 19 DMX channel in optional 
> Beam angle 12 degree 34000Lux at 1m,14.5 degree 28000Lux at 1m 
> Manual zoom 12 or 14.5 degree 
> 1 Color wheel with 8 diachronic colors plus open 
> 1 Rotated gobo wheel with 7 rotated interchangeable gobos plus open. 
> Rotated 3 facet prism with speed adjustable and variable direction 
> 0~100% linear dimmer and 1-18 times/sec high speed electronic strobe   
> DMX512, master-slave and sound activated controllable and auto with 8 built-in programs   

 
INSTALLATION   
 
Rigging   
 
The installation of the projector has to be built and constructed in a way that it can hold 10 times the 
weight for 1 hour without any harming deformation. 
 
IMPORTANT!OVERHEAD  RIGGING  REQUIRES  EXTENSIVE  EXPERIENCE,  including  calculating 
working  load  limits,  installation  material  being  used,  and  periodic  safety  inspection  of  all  installation 
material and the projector. If you lack these qualifications, do not attempt the installation yourself, but 
instead  use  a  professional  structural  rigger.  Improper  installation  can  result  in  bodily  injury  and  or 
damage to property. The projector had to be installed out of the reach of people 
 
DANGER  OF  FIRE!  When  installing  the  device,  make  sure  there  is  no  highly-inflammable 
material(decoration articles, etc.)within a distance of min.0.5m. 
 
DMX 512 connection/ connection between fixture 
The  wires  must  not  come  into  contact  with  each  other,  otherwise  the  fixture  will  not  work  at  all  or 
properly.  Please note  the  starting  address depends  upon  which controller is being used.  Only use a 
DMX cable and 3-pin XLR-plugs and connectors in order to connect the controller with the fixture or one 
fixture to another   

 

Connection with the mains.   

Содержание SCAN 75 LED SCANNER









Отзывы: