background image

 

 

 
 
 
 
 
 
 
Every person involved with installation. operation and maintenance of this fixture has to   
- be qualified 
- follow the instruction of this manual 
- consider this manual to be part of the total product 
- Keep this manual for the entire service life of the product 
- pass this manual to every future owner or use of the product 
 

INTRODUCTION 

 
Thank you for choosing our fixture, if you follow up the instruction given in this manual we be sure that 
you will enjoy this product for a long period of time   

 

SAFETY INSTRUCTION 

 

 
 
 

 
 

This device has left our premises in absolutely perfect condition .In order to maintain this condition and 
to ensure a safe operation, it is absolutely necessary for the user to follow the safety instruction and 
warning notes written in this user manual.   

 

Important: Damages caused by the disregard of this user manual are not subject o warranty, the dealer 
will not accept liability for any resulting defects of problem. If the device had been exposed to drastic 
temperature fluctuation (e.g. after transportation),do not switch it on immediately. The arising 
condensation water might damage your device. Leave the device switched off until it had reached room 
temperature. Please make sure that there are no obvious transport damages, should you notice any 
damages on the AC connection cable or on the casing, do not take the device into operation and 
immediately consult your local dealer. 

 

OPERATING DETERMINATIONS 
This device is designed for permanent operation. Consistent operation breaks will ensure that the 
device will serve you for a long time without defects. Do not shake the device. Avoid brute force when 
installing or operation the device. Never lift the fixture by holding it at the projector-head. As the 

CAUTION! 

Be careful with your operations, With a dangerous voltage you can suffer a dangerous electric 

shock when touching the wires. 

CAUTION ! 

Keep this device away from rain and moisture 

Unplug mains lead before opening the housing 

For your own safety, please read this user manual carefully before you initially start-up 

Содержание SCAN 75 LED SCANNER









Отзывы: