00070199.DOC, Version 1.0
8/10
For installations on wood beam walls: always use a detector (beam finder) in order to center the fixation
screws.
Never mount this product to metal studs.
Before assembling, check the location of the nearest mains socket.
The total weight of the load must never exceed the maximum load of the mount.
Always tighten screws and nuts firmly, but do not overtighten.
EUROLITE accepts no liability for damages caused by incorrect assembly or by improper use.
OPERATING DETERMINATIONS
This mount is designed for installing a beamer to the ceiling/wall. The given maximum load must never be
exceeded.
This mount is designed for professional use, e.g. on stages, in discotheques, theatres etc. and in private
homes.
Make sure that the area below the installation place is blocked when rigging, derigging or servicing.
Please consider that unauthorized modifications on the mount are forbidden due to safety reasons!
If this mount will be operated in any way different to the one described in this manual, the product may suffer
damages and the guarantee becomes void. Furthermore, any other operation may lead to dangers like crash
etc.
INSTALLATION
The installation of the device has to be built and constructed in a way that it can hold 5 times the weight for 1
hour without any harming deformation.
When rigging, derigging or servicing the device staying in the area below the installation place, on bridges,
under high working places and other endangered areas is forbidden.
The operator has to make sure that safety-relating and machine-technical installations are approved by an
expert before taking into operation for the first time and after changes before taking into operation another
time.
The operator has to make sure that safety-relating and machine-technical installations are approved by an
expert after every four year in the course of an acceptance test.
The operator has to make sure that safety-relating and machine-technical installations are approved by a
skilled person once a year.
Procedure:
The device should be installed outside areas where persons may walk by or be seated.
IMPORTANT! OVERHEAD RIGGING REQUIRES EXTENSIVE EXPERIENCE, including (but not limited to)
calculating working load limits, installation material being used, and periodic safety inspection of all
installation material and the device. If you lack these qualifications, do not attempt the installation yourself,
