nicht ausgelegt ist. Beachten Sie auch unbedingt die Hinweise des Lampenherstellers. Bei Zuwiderhandlungen erlischt die Garantie. Setzen Sie nun die
Lampe ein. Klemmen Sie die Lampe mit dem Lampenklemmring fest. Schließen Sie die Lampe über die Kabelschuhe an die Netzleitung an. Schließen Sie
den Schutzleiter an die Schutzleiterschraube am Gehäuse an. Schließen Sie nun das Gerät wieder. Schalten Sie das Gerät niemals ein, ohne vorher den
Gehäusedeckel geschlossen zu haben.
INSTALLATION
A chten S ie bei d er In stallatio n d es G erätes bitte d arau f, daß sich im A b stand
von m ind. 2 m keine leicht entflam m baren M aterialien (D eko, etc.) befinden.
2B1>475618B
Befestigen Sie den Spot mit dem Bügel an Ihrem Traversensystem. Verwenden Sie aus Sicherheitsgründen ein Sicherheitsfangseil.
BEDIENUNG
Wenn Sie das Gerät an die Spannungsversorgung angeschlossen haben, steuern Sie die Spots über Ihr Lichtsteuergerät.
REINIGUNG UND WARTUNG
Die Lampe muß ausgewechselt werden, sobald sie beschädigt oder verformt ist.
Vor dem Wechseln der Lampe diese unbedingt erst abkühlen lassen und das Gerät allpolig von der Netzspannung trennen.
Sollten Sie noch weitere Fragen haben, steht Ihnen Ihr Fachhändler jederzeit gerne zur Verfügung.
OPERATING INSTRUCTIONS
3$56327
For your own safety, please read this user manual carefully before you initial start-up.
Every person involved with the installation, operation and maintenance of this device have to:
- be qualilfied
- follow the instructions of this manual
INTRODUCTION
Thank you for having chosen a PAR-36 SPOT. Unpack your PAR-36 SPOT.
Before you initial start-up, please make sure that there is no damage caused by transportation. Should there be any, consult your dealer and do not use the
device.
SAFETY INSTRUCTIONS
This device has left our premises in absolutely perfect condition. In order to maintain this condition and to ensure a safe operation, it is absolutely necessary
for the user to follow the safety instructions and warning notes written in this user manual.
Important:
Damages caused by the disregard of this user manual are not subject to warranty. The dealer will not accept liability for any resulting defects or
problems.
If the device has been exposed to drastic temperature fluctuation (e.g. after transportation), do not switch it on immediately. The arising condensation water
might damage your device. Leave the device switched off until it has reached room temperature.
Never let the power-cord come into contact with other cables! Handle the power-cord and all connections with the mains with particular caution! Make sure
that the available voltage is not higher than stated on the rear panel. Make sure that the power-cord is never crimped or damaged by sharp edges. Check the
device and the power-cord from time to time. Always disconnect from the mains, when the device is not in use or before cleaning it. Only handle the power-
cord by the plug. Never pull out the plug by tugging the power-cord.
During the initial start-up some smoke or smell may arise. This is a normal process and does not necessarily mean that the device is defective.
41>75B ?6 2EB>9>7
N ever touch the device d uring th e o peration! The housing h eats up to approx. 140° C.
Please note that damages caused by manual modifications on the device or unauthorized operation by unqualified persons are not subject to warranty.
Keep away children and amateurs!
OPERATING DETERMINATIONS
This device is a spot designed for professional use on stages, in discotheques, etc. This fixture is only allowed to be operated with an alternating current of
max. 28 V/50-60 Hz. This device was designed for indoor use only. Do not shake the device. Avoid brute force when installing or operating the device.
You can install the device at any desired place in dry rooms. Please make sure that the device is not exposed to extreme heat, moisture or dust. There
should not be any cables lying around. You endanger your own and the safety of others! The minimum distance between light-output and the illuminated
surface must be more than 2 meters (Long) or 1 meter (Short). Make sure that the area below the installation place is blocked when rigging, derigging or
servicing the fixture.
Always fix the fixture with an appropriate safety-rope. The maximum ambient temperature t
a
= 45° C must never be exceeded. The lamps need to be
preheated in order to protect them. Please adjust the filament preheat of your dimming pack so that the coiled filament glows slightly. Operate the device only
after having familiarized with its functions. Do not permit operation by persons not qualified for operating the device. Most damages are the result of
unprofessional operation! Please use the original packaging if the device is to be transported. Please consider that unauthorized modifications on the device
are forbidden due to safety reasons!
If this device will be operated in any way different to the one described in this manual, the product may suffer damages and the guarantee becomes void.
Furthermore, any other operation may lead to dangers like short-circuit, burns, electric shock, lamp explosion, crash etc.
