00122161.DOCX, Version 1.0
22/28
Connection to the mains
The device uses an auto-range power supply that accepts input voltages between 100 und 240 volts.
1 The device is equipped with a lockable power input connector. Fix the mains cable and turn it to the right
until it locks. Connect the device via the mains cable to a grounded mains socket. Thus the unit is
switched on.
2 To switch off the unit, disconnect the power plug.
3 Do not connect the unit to the mains voltage via a dimmer. For a more convenient operation, use a mains
outlet which is switchable.
Power supply of further devices
The jack POWER OUT allows for power supply of further devices. To interconnect several devices, connect
the jack POWER OUT to the input POWER IN of the next unit until all units are connected. Matching power
cables with IP T-Con plugs are available as accessories. In this manner, up to 8 devices can be linked at
230/240 input voltage and up to 4 devices at 110/115 input voltage.
Please make sure that open contacts are closed with caps in order to avoid humidity and dirt in the
device
OPERATION
After connecting the device to the mains it is ready for operation. After switching on, the display will
illuminate and indicates the current inner/LED temperature. This notice disappears after a short time.
The display then indicates the last operating mode. The operating modes can be selected by means of the
display and the control buttons. All settings remain stored even if the device is disconnected from the mains.
The device can be operated in stand-alone mode via the control board or in DMX-controlled mode via any
commercial DMX controller.
Menu structure
Display
Function
A001
001-512
DMX address setting
CHXX
CH04 - 4-channel mode
Setting DMX channel mode
CH05 - 5-channel mode
CH08 - 8-channel mode
CFXX
CF00 ~ CF99
Color fade
with increasing speed
(Master-mode)
CCXX
CC00 ~ CC99
Color change
with increasing speed
(Master-mode)
CSXX
CS00 ~ CS19
Color presets (Master-mode)
r000
000 ~ 255
Brightness of the red LEDs dark > bright
G000
000 ~ 255
Brightness of the green LEDs dark > bright
b000
000 ~ 255
Brightness of the blue LEDs dark > bright
E000
000 ~ 255
Brightness of the white LEDs dark > bright
dEMo
Auto mode
(Master-Mode)
Soun
Sound controlled mode
(Master-Mode)
dELX
dEL0
Dimmer speed 0 = LED
dEL1
Dimmer speed 1 = Halogen
EFXX
EFoN
Wireless on
EFoF
Wireless off
