00103656, Version 1.0
28/36
Control Board
The Control Board offers several features: you can simply set the starting address or run the pre-
programmed program.
Press Menu until the display is lit. Browse through the main menu by pressing Up or Down. Press Enter in
order to select the desired menu. You can change the selection by pressing Up or Down. Press Enter in
order to confirm. You can leave every mode by pressing Menu. The functions provided are described in the
following sections.
The display shuts off after 15 seconds of inactivity. With the touch of a button it lights up again.
Default settings shaded.
Menu
Sub menu
Function
MENU 1:
DMX 512
DMX512
45CH: xxx, 001
Setting DMX channel mode (45CH, 21CH, 12 CH or 8CH)
and DMX starting address (001 - 512)
DMX512
21CH: xxx, 001
DMX512
12CH: xxx, 001
DMX512
8CH: xxx, 001
MENU2:
TILT
TILT
NO
TILT reverse (only available for the vertical movement
(TILT) 0-360°, not available for the endless rotation)
TILT
YES
MENU3:
TEST
Master Mode
TEST
CH01: xxx, 000
V
CH45: xxx, 000
Test function of the respective channels
(CH01-CH45, values 000 - 255), see also DMX protocol
MENU4:
AUTO
Master Mode
AUTO
MAUTO: x, 1
Internal programs 1-9
with vertical movement (TILT)
AUTO
AUTO: x, 1
Internal programs 1-9
without vertical movement (TILT)
AUTO
MSOUND: x, 1
Sound controlled internal programs 1-9
with vertical movement (TILT)
AUTO
SOUND: x, 1
Sound controlled internal programs 1-9
without vertical movement (TILT)
AUTO
TILT: xxx, 000
Manual adjustment of the TILT angle (0-255), see also
DMX protocol (only available for AUTO: x and SOUND: x)
MENU5:
PASSWORD
PASSWORD
UNLOCK
Turn off password protection.
Default setting = 988
PASSWORD
LOCK
Turn on password protection.
Default setting = 988
MENU6:
RE-DEF-
Restore factory settings
MENU7:
RESET
Reset
