EuroLite LED TMH-S200, Руководство пользователя

Страница: 29 / 36

00128934, Version 1.0 29/36
Control Board
The Control Board offers several features: you can easily set the starting address, run the pre-programmed
program or make a reset.
Press OK until the display is lit. Browse through the mode menu by pressing the arrow buttons (up and
down). Press OK 2 x in order to select the desired menu. Browse through the main menu by pressing the
arrow buttons up and down. Press OK to enter the respective menu item of the main menu. You can change
the selection by pressing the arrow buttons (left and right). Press OK in order to confirm. You can leave
every mode by pressing the arrow buttons (left and right). The functions provided are described in the
following sections.
Default settings shaded.
Mode menu Main menu Sub menu Function
Set
(Setting)
Run mode
DMX/Sound/Random/
Auto 1, Auto 2 DMX mode / music control / random auto
program / auto program 1 and 2
DMX address 001~ 512 DMX address setting
Channel mode 17 CH Number of DMX channels
Invert PAN ON/OFF
Reverse movement
Invert TILT ON/OFF
PAN-TILT Swap ON/OFF
PAN-TILT swap
PAN-TILT Encoder ON/OFF Automatic PAN/TILT adjustment
DMX signal Keep/clear Action if no DMX
Delay ON/OFF Dimmer speed (step response)
Linear color ON/OFF Switch color change from step to linear color
Load default OK/Cancel Restore factory settings
Manu
(Manual)
PAN ... PAN = XXX ... Test function
Sys
(System)
Ver Software version
Reset Cal Calibration to standard position
Sensor Monitor Only service function for producer
System errors Error message
DMX monitor
Current DMX address of the channels
180° Display reverse 180 degrees
°C Inside temperature
EN Display language select - English/Chinese
Set
Run Mode
DMX mode
This mode allows the unit to be controlled via every standard DMX controller.
Sound
With this function, you can run the internal program sound-controlled.
Random auto mode
With this function, you can run the random internal program.
Auto mode (Auto 1+2)
With this function, you can run 2 different internal programs.
DMX address setting
With this function, you can adjust the desired DMX address via the Control Board.
Number of DMX channels
With this function, you can display the number of the DMX channels.