EuroLite LED TMH-51, Руководство пользователя

Страница: 31 / 36

00110746, Version 1.1 31/36
Note:
After switching on, the device will automatically detect whether DMX 512 data is received or not. If the data
is received at the DMX-input, the a dot on the display will blink. If there is no data received at the DMX-input,
the dot will not blink.
This situation can occur if:
- the XLR plug (cable with DMX signal from controller) is not connected with the input of the device.
- the controller is switched off or defective,
- the cable or connector is defective or the signal wires are swap in the input connector.
DMX-protocol
The device has three different DMX channel modes. The Control Board allows you to assign the DMX
channel mode.
16 Channel Mode
Channel DMX Value Function
1 000 - 255 Pan 0°~ 540°
2 000 - 255 Tilt 0°~ 210°
3 000 - 255 Pan&Tilt Speed with decreasing speed
4 000 - 255 Master Dimmer 0%~ 100%
5
000 - 008 No function
009 - 255 LED Strobe with increasing speed
6 000 - 255 RED LED Dimmer 0%~ 100%
7 000 - 255 Green LED Dimmer 0%~ 100%
8 000 - 255 Blue LED Dimmer 0%~ 100%
9 000 - 255 White LED Dimmer 0%~ 100%
10 000 - 255 SMD Dimmer 0%~ 100%
11
000 - 008 No function
009 - 255 SMD Strobe with increasing speed
12
SMD
Section 1
000 - 010 No Function
011 - 044 Red
045 - 079 Green
080 - 114 Blue
115 - 149 Red and Green
150 - 184 Red and Blue
185 - 219 Green and Blue
220 - 255
RGB
13
SMD
Section 2
000 - 010 No Function
011 - 044 Red
045 - 079 Green
080 - 114 Blue
115 - 149 Red and Green
150 - 184 Red and Blue
185 - 219 Green and Blue
220 - 255
RGB
14
SMD
Section 3
000 - 010 No Function
011 - 044 Red
045 - 079 Green
080 - 114 Blue
115 - 149 Red and Green