EuroLite LED TMH-51, Руководство пользователя

Страница: 29 / 36

00110746, Version 1.1 29/36
Stand-alone operation
In the Stand-alone mode, the LED TMH-51 Hypno Moving-Head Beam can be used without controller.
Disconnect the LED TMH-51 Hypno Moving-Head Beam from the controller and call up the internal
programs. Please refer to the instructions under
Control Board .
Control Board
The Control Board offers several features: you can easily set the starting address or run the pre-
programmed program.
Press MODE to access the menu on the display. Browse through the main menu by pressing UP or DOWN.
Press ENTER in order to select the desired menu. You can change the selection by pressing UP or DOWN.
Press ENTER in order to confirm. You can leave every mode by pressing MODE. The functions provided are
described in the following sections.
Menu Sub menu Function
Addr 001-512 DMX address setting
Chnd
16Ch
Setting DMX channel mode
21Ch
23Ch
Slnd
Mast Master-setting
SL1
Slave-setting
SL2
d512
When no DMX signal is received, no function: Blackout
Shnd
Sh1
Internal programs
Sh2
Sh3
Sh4
Auto
Auto mode
Auto1
Auto2
Auto3
Auto4
SP0 – SP9 Speed (increasing)
Soun On/Off Sound controlled mode
Sens 000~100 Microphone sensitivity (increasing)
Led
on
LED on/off
off
disp
on
Display reverse 180°
off
Pan
Yes
Reverse movement PAN/TILT
No
Tilt
Yes
No
Test Function test
Temp Temperature indication
hour Fixture running time
Ver Software version
rset Reset