00054285, Version 1.3
30/30
Procedure:
Step 1:
Open the fuseholder on the rear panel with a fitting screwdriver.
Step 2:
Remove the old fuse from the fuseholder.
Step 3:
Install the new fuse in the fuseholder.
Step 4:
Replace the fuseholder in the housing.
Should you need any spare parts, please use genuine parts.
If the power supply cable of this device becomes damaged, it has to be replaced by a special power supply
cable available at your dealer.
Should you have further questions, please contact your dealer.
TECHNICAL SPECIFICATIONS
Power supply:
230 V AC, 50 Hz ~
Power consumption:
170 W
DMX control channels:
12
DMX512 connection:
3-pin XLR
Sound-control:
via built-in microphone
Color-wheel:
7 colors and open
Rotating gobo wheel:
6 gobos and open
Number of LEDs:
1
Type of LEDs:
60 W
Beam angle:
approx. 12°
Maximum PAN-movement:
585°
Maximum TILT-movement:
270°
Length of base:
280 mm
Width of yoke:
250 mm
Height (head horizontal):
320 mm
Weight (net):
7.5 kg
Maximum ambient temperature
T
a
:
45° C
Maximum housing temperature
T
B
(steady state):
55° C
Min. distance from flammable surfaces:
0.5 m
Min. distance to lighted object:
0.1 m
Fuse:
F 2 A, 250 V
Please note: Every information is subject to change without prior notice. 13.08.2012 ©
