EuroLite LED THA-100F MK3, Руководство пользователя, Страница: 25 / 32

00133815, Version 1.0 25/32
POWER SUPPLY
The device uses an auto-range power supply that accepts input voltages between 100 und 240 volts.
1 Connect the device via the mains cable to a grounded mains socket. Thus the unit is switched on.
2 To switch off the unit, disconnect the power plug.
3 Do not connect the unit to the mains voltage via a dimmer. For a more convenient operation, use a mains
outlet which is switchable.
4 The jack POWER OUT allows for power supply of further devices. To interconnect several devices,
connect the jack POWER OUT to the input POWER IN of the next unit until all units are connected.
Matching power cables are available as accessories. In this manner, up to 8 devices can be linked at
230/240 input voltage and up to 4 devices at 110/115 input voltage.
OPERATION
After you connected the device to the mains, the device starts running.
The display lights up and you can choose the desired mode via the buttons MODE, ENTER, UP, DOWN.
By pressing and turning the dimmer control clockwise, you can manually adjust the brightness of the LED.
To save the thus manually set brightness, press the dimmer control again. The dimmer control can be used
in any mode. To exit the manual dimmer mode, use the display and the buttons of the control board.
Use the zoom control to focus or widen the light beam.
The device can be operated in Stand Alone mode via LC display with operating buttons or alternately in
DMX-controlled mode via lighting controller.
Stand-alone mode
In the stand-alone mode, you can do without a controller. Disconnect the device from the controller.