EuroLite LED Pixel Tower, Руководство пользователя

Страница: 38 / 52

00122172.DOCX, Version 1.0 38/52
OPERATION
After connecting the device to the mains it is ready for operation. The display indicates the last operating
mode. The operating modes can be selected by means of the display and the control buttons. All settings
remain stored even if the device is disconnected from the mains.
The device has two operating modes. It can be operated in stand-alone mode via the control board and the
EUROLITE IR-34 remote control or in DMX-controlled mode via a standard DMX controller and wireless via
QuickDMX with the optional available EUROLITE QuickDMX USB Wireless Transmitter/Receiver.
Stand-alone mode
In the stand-alone mode, you can do without a controller. Disconnect the device from the controller and call
the desired setting. Please refer to the instructions under Control Board.
Control Board
The Control Board offers several features: you can easily set the starting address,
run the pre-programmed program or select a DMX channel mode.
The main menu is accessed by pressing Menu. Browse through the menu by
pressing Up or Down. Press Enter in order to select the desired menu. You can
change the selection by pressing Up or Down. Press Enter in order to confirm. You
can leave every mode by pressing Menu. The functions provided are listed in the
following sections.
Mode Display Function
1 DMX mode
>DMX
Addr 1
DMX Lost/
DMX 512
>Address
>CH_mode
Address
0-512
>5 Chl
>12 Chl
>20 Chl
>27 Chl
>84 Chl
Starting address and DMX
channel mode
2 Automatic mode >Auto
>Speed
Speed
0-255
Running speed in automatic
mode, slow > fast
>Fade-
No/Yes
>Yes
>No
Fading in automatic mode
slow > fast
Mod-RGBW
>RGBW
>FL
>All
LEDs used for automatic and
sound controlled mode
RGBW = RGBW-LEDs
FL = SMD-LEDs
All = RGBW-LEDs + SMD-
LEDs
>Pty-..
>3C1
>3C2
>3C3
>3C4
>3C5
>3C6
>6C1
>6C2
>6C3
>CA0
>Rai
Programs "Party" for the
selection of Mod-RGBW:
"RGBW and All".
MENU UP DOWN ENTER