00038069.DOC, Version 1.1
20/20
Replacing the fuse
If the fine-wire fuse of the device fuses, only replace the fuse by a fuse of same type and rating.
Before replacing the fuse, unplug mains lead.
Procedure:
Step 1:
Unscrew the fuseholder on the rearpanel with a fitting screwdriver from the housing (anti-
clockwise).
Step 2:
Remove the old fuse from the fuseholder.
Step 3:
Install the new fuse in the fuseholder.
Step 4:
Replace the fuseholder in the housing and fix it.
Should you need any spare parts, please use genuine parts.
If the power supply cable of this device becomes damaged, it has to be replaced by authorized dealers only
in order to avoid hazards.
Should you have further questions, please contact your dealer.
TECHNICAL SPECIFICATIONS
Power supply:
230 V AC, 50 Hz ~
Power consumption:
15 W
DMX-control-channels:
4
DMX-512-connection:
3-pin XLR
Sound-control:
via built-in microphone
Number of LEDs:
57
Dimensions (LxWxH):
445 x 245 x 195 mm
Weight:
2.5 kg
Maximum ambient temperature T
a
:
45° C
Maximum housing temperature T
B
(steady state):
50° C
Min. distance from flammable surfaces:
0.5 m
Min. distance to lighted object:
0.1 m
Fuse:
F 0.5 A, 250 V
Accessory:
FUTURELIGHT EX-6/32 controller
No. 51834046
FUTURELIGHT CP-240 controller
No. 51834265
FUTURELIGHT CP-512/64 controller 16bit
No. 51834295
EUROLITE DMX operator 192 channels
No. 70064520
EUROLITE DMX scan control 192 channels
No. 70064525
Wizard-512 USB DMX so interface
No. 51860102
Wizard-1024 USB DMX so interface
No. 51860110
FUTURELIGHT DES-3 DMX-terminator 3-pin
No. 51834001
Please note: Every information is subject to change without prior notice. 17.02.2009 ©