EuroLite LED KLS PARty, Руководство пользователя, Страница: 26 / 32

00118185, Version 1.1 26/32
Remote control IR-30
When actuating a button, always direct the remote control towards the sensor. There must be no obstacles
between remote control and the sensor.
Button Function
Blackout on/off
DMX
DMX-mode
Address setting via DMX (+)/(‒)
A1
Presest colors
Color/color combination choice via COLOR
A2
Switching colors
Program speed via SPEED
A3
Fading colors
Program speed via SPEED
A4
Sound control
For program choice press A4 repeatedly
Microphone sensitivity via SEN
A5
Strobe effect
Flash rate via SPEED
A6
Auto program
Program speed via SPEED
A7
Chaser program
Program speed via SPEED
DMX - / + DMX address setting via (+)/(‒)
COLOR - / +
Choice of color/color combination under A1
Setting via (+)/(‒)
SPEED - / +
Program speed under A2, A3, A5, A6, A7;
Setting via (+)/(‒)
SEN Microphone sensitivity; Levels 1-9 ; Setting via (+)/(‒)
Notes:
• The remote control is supplied with a battery inserted. An insulating foil between the battery and the battery
contacts prevents the battery from being discharged during storage. Prior to the first operation remove the
foil from the battery support on the rear side of the remote control. Otherwise operation of the remote
control is not possible.
• If the range of the remote control decreases, replace the battery. For this purpose,
on the rear side of the remote control press the small bar with the groove to the
right and at the same time remove the battery support. For operation, one 3 V
button cell type CR 2025 is required. When inserting, pay attention that the
positive pole of the button cell shows upwards in the support.
• Remove the battery from the remote control as a precaution if the device is not used for a longer period of
time.
DMX
A1
A2 A3 A4
A5 A6 A7
DMX
COLOR
SPEED
SEN