00037747.DOC, Version 1.1
20/20
Procedure:
Step 1:
Open the fuseholder on the rear panel with a fitting screwdriver.
Step 2:
Remove the old fuse from the fuseholder.
Step 3:
Install the new fuse in the fuseholder.
Step 4:
Replace the fuseholder in the housing.
Should you need any spare parts, please use genuine parts.
If the power supply cable of this device becomes damaged, it has to be replaced by a special power supply
cable available at your dealer.
Should you have further questions, please contact your dealer.
TECHNICAL SPECIFICATIONS
Power supply:
230 V AC, 50 Hz ~
Power consumption:
70 W
Number of DMX channels:
15
DMX-512 connection:
3-pin XLR
Number of 10mm LEDs:
432
Beam angle:
25°
Sound-control:
via built-in microphone
Maximum ambient temperature
T
a
:
45° C
Maximum housing temperature
T
B
(steady state):
60° C
Min.distance from flammable surfaces:
0.50 m
Min.distance to lighted object:
0.10 m
Fuse:
F 2 A, 250V
Dimensions (LxWxH):
1110 x 55 x 295 mm
Weight:
8 kg
Accessories:
No.
Foot switch for LED KLS-200
42109710
EUROLITE STV-40S Lighting stand, Steel
59006996
EUROLITE STV-40A Lighting stand, Alu
59007001
Please note: Every information is subject to change without prior notice. 29.09.2008 ©
