00123337, Version 1.0
20/24
OPERATION
The display indicates the last operating mode. The operating modes can be selected by means of the display
and the control buttons. All settings remain stored even if the device is disconnected from the mains. The
device can be operated in stand-alone mode via the control board or in DMX-controlled mode via any
commercial DMX controller.
Stand-alone operation
Operating buttons
MODE
Selects the operating mode or returns to the initial screen.
ENTER
Activates a value to be modified or saves a value when modifying.
UP
Selects the next menu item or increases values when modifying.
DOWN
Selects the previous menu item or decreases values when modifying.
Menu structure
Default highlighted in gray
Mode
Display
Function
DMX
ADDR: 001 ~ 512
Setting DMX starting address
DMX Mode
01CH
Setting DMX channel mode
03CH
SLAVE
SLAVE
Slave-setting
DimMode
LED
Dimmer speed 1 = LED
Halogen
Dimmer speed 2 = Halogen
DimCurve
Linear
The increase in light intensity appears to be linear as DMX
value is increased
Square
Light intensity control is finer at low levels and coarser at
high levels
INV. Square
Light intensity control is coarser at low levels and finer at
high levels
S-Curve
Light intensity control is fine at low levels and high levels
and coarser at medium levels
Manual
WW: 000 – 255
Increasing intensity 0 – 100%
STR: 000 – 255
Increasing speed 0 – 100%
No DMX
Hold / Blackout
Modes if no DMX
Temp
xxx °F/°C
Inside temperature in °C or °F
AutoLock
OFF / ON
Key lock activation
(Password:UP-DOWN-UP-DOWN-ENTER)
Op.Time
000
Fixture running time since initial start-up
DFSE
OFF / ON
Restore factory settings
FIXTURE ID
(RDM)
Password 000-255
Passwort: 050
RDM ID 0000-9999
