22
•
EN
OPERATION
The built-in control panel of the unit features four operating buttons and a display which shows all operation
statuses. After connecting the unit to the mains it requires a short initialization process and is then ready for
operation. The display shortly indicates the firmware version followed by the last operating mode. The operating
modes can be selected by means of the display and the control buttons. If inputs, such as program selection or
running speed are not confirmed within about 4 seconds by pressing the ENTER button, the previously selected
mode, or the previously set value is automatically activated. All settings remain stored even if the device is
disconnected from the mains.
Operating buttons
MODE
Selects the operating mode or returns to the initial screen.
ENTER
Activates a value to be modified or saves a value when modifying.
UP
Selects the next menu item or increases values when modifying.
DOWN
Selects the previous menu item or decreases values when modifying.
Menu structure
Automatic Mode
Running Speed
Sound Control
Slave Mode
DMX Mode/
Start Address
Operation without external control
In automatic mode, 7 show programs are available that run at an adjustable speed or sound-controlled via the
built-in microphone if desired.
No.
Description
0
Laser + color LEDs + white strobe LEDs
1
Laser + color LEDs
2
Laser + white strobe LEDs
3
Color LEDs + white strobe LEDs
4
Color LEDs
5
Laser
6
White strobe LEDs
MODE
MODE
MODE
