00057364.DOC, Version 1.0
21/24
Stand Alone-Mode
Chaser
A chaser is a sequence of different steps that will be called up one after another in a continuous loop. With
the LED BAR-18 TCL 18x3W, you can select up to 8 different chasers.
Selecting a chaser
Press the MODE button to select the internal program mode. Select the desired chaser (01 – 8) via the UP
or DOWN buttons (see following graphic).
Press the ENTER button to select speed and flash settings, respectively. You can select the desired values
via the UP or DOWN buttons.
Speed from 00 to 99, increasing.
Flash from 00 to 99, increasing.
Please press the ENTER button to confirm and to exit the STAND ALONE Mode.
01 = Dimming
R00 G00 B00 F00
02 = Color jump
Speed 00
Flash 00
03 = Color flow
Speed 00
Flash 00
04 = Color chase
Speed 00
Flash 00
05 = Color flow 2
Speed 00
Flash 00
06 = Dreaming
Speed 00
Flash 00
07 = Fade flow
Speed 00
Flash 00
08 = Multi flow
Speed 00
Flash 00
Auto Mode
In Auto Mode the chasers are called up automatically in a continuous loop.
Press the MODE button to select the AUTO mode.
Press the ENTER button to select the desired frequency of the loops.
The desired frequency of the loops (Frequency = FQN 01-99) can be selected via the UP or DOWN buttons.
Please press the ENTER button to confirm and to exit the AUTO Mode.
Sound Control Mode
Press the MODE button and choose SOUND CONTROL mode (SOUND).
Press the ENTER button to select the desired sensitivity.
The desired sensitivity (Sensit 00-99) can be selected via the UP or DOWN buttons.
Please press the ENTER button again to confirm and to exit the SOUND Mode.
Master/Slave Mode
The master/slave-operation enables that several devices can be synchronized and controlled by one master-
device.
On the rear panel of the LED BAR-18 TCL 18x3W you can find an XLR-jack and an XLR-plug, which can be
used for connecting several devices.
