EuroLite CHASER 405, Руководство пользователя

Страница: 12 / 25

70062625_V_1_0.DOC 12/25
4.2 Overview
Frontpanel
Power
Normal
Full on
Chase
Music
Manual
Auto Next
Run
MIC MIC
Monitor
1 2 3 4
Stand-by
ON
Audio Level
Slow
Fast
Speed
Min Max
CHASER 405
1 2 3 4 5 6 7 8 9 10
1) POWER SWITCH
2) FULL ON-BUTTON
3) MUSIC-BUTTON
4) AUTO-BUTTON
5) NEXT-BUTTON
6) STANDBY-BUTTON
7) MICROPHONE
8) CHANNEL
LEDS
9) AUDIO-CONTROL
10) SPEED-CONTROL
Rearpanel
FUSES
CH4 CH3 CH2 CH1
5 x 20mm 6.3A
AUDIO INPUT
100 mV -- 1Vp-p
1/4'' MONO JACK
A INPUT C
230 V AC, 50 Hz ~
Vor Gebrauch Anleitung lesen. Gerät
vor Feuchtigkeit schützen! Gefahr eines
elektrischen Schlages, niemals das
Gerät öffnen! Im Geräteinnern befinden
sich keine zu wartenden Teile. Wartungs-
und Servicearbeiten nur durch autorisier-
ten Fachhandel!
Read user manual before use. Keep away
from moisture! Risk of electric shock,
never open the housing! There are no
serviceable parts inside the device. Main-
tenance and service operations only by
authorized dealers.
Typ/Type: CHASER 405
Spannungsversorgung/Power supply: 230 V AC, 50 Hz ~
Max. Gesamtleistung/Max. power output: 3680 W
Max. Gesamtstrom/Max. total current: 16 A
Max. Nennleistung/Kanal/Max. output/channel: 1150 W
Max. Nennstrom/Kanal/Max. current/channel: 5 A
Sicherung/Fuse: F 6.3 A, 250 V
www.eurolite.de
euro lite eurolite
®
OUTPU S T
CH 4 - CH 3 - CH-2 CH-1
11 12 13 14
11) CHANNEL OUTPUTS
12) FUSEHOLDERS
13) AUDIO INPUT SOCKET
14) AC INPUT SOCKET
5. SETUP
5.1 Installation
Install the device on a plane surface or install it in rack.
Rack-installation: This device is built for 19" racks (483 mm). The rack you use should be a Double-Door-
Rack where you can open the frontpanel and the rear panel. The rack should be provided with a cooling fan.
When mounting the controller into the rack, please make sure that there is enough space around the device
so that the heated air can be passed on. Steady overheating will damage your device.
You can fix the controller with four screws M6 in the rack.
5.2 Sound-control
The sound-control works via the built-in microphone or via the sound input socket.
Connect the sound-signal from the mixer (e.g. Master 2) with the jack-socket on the rear panel (input
sensitivity 0.1 V - 1 V).
5.3 Connection with the mains
Connect the device to the mains with the power-plug.