00096586.DOC, Version 1.1
35/44
In the stand-alone mode, the device can be used without controller. You can do without a controller
as the device features a built-in microphone.
You can adjust the sensitivity with the rotary-control on the bottom of the device.
Disconnect the device from the controller and select the desired mode.
Please refer to the instructions under Control Board.
Control Board
The Control Board offers several features: you can simply set the starting address, run the pre-programmed
program or select a DMX channel mode.
The main menu is accessed by pressing Menu. Browse through the menu by
pressing Up or Down. Press Enter in order to select the desired menu. You
can change the selection by pressing Up or Down. Press Enter in order to
confirm. You can leave every mode by pressing Menu. The functions
provided are listed in the following sections.
Menu level 1
Menu level 2
Description
Addr
d001-d512
DMX address setting
CHnd
3CH, 4CH,
6CH, 8CH,
10CH
Setting DMX channel mode
SLAU SL.AU Slave
Mode
SP-- SP00-SP99
Select the desired program speed
S00 – S99 (increasing)
Pr-- Pr00-Pr30
Preset colors
ASC- AC00-AC99
Switching colors
AC00-AC99 (with increasing speed)
FAdE FA00-FA99
Fading colors
FA00-FA99 (with increasing speed)
FLAS FL00-FL99
Strobing colors
FL00-FL99 (with increasing speed)
rL-- r000-r255
Dimmer intensity of red LED color
000 – 255 (increasing)
GL-- G000-G255
Dimmer intensity of green LED color
000 – 255 (increasing)
MENU UP DOWN ENTER
