00112598.DOC, Version 1.0
28/48
Rechargeable batteries/batteries are hazardous waste which needs to be disposed of appropriately. If the
device is to be disposed, the batteries have to be removed first. Take it to a local recycling plant for a
disposal which is not harmful to the environment. Do not dispose of rechargeable batteries/batteries into
household waste!
Make sure that the poles are correct when inserting the battery. Never let batteries lying around openly as
there is the danger that these can be swallowed by children or domestic animals. Immediately consult a
doctor when batteries are swallowed! Leaking or damaged batteries can cause irritations when getting into
contact with the skin. In this case use appropriate protective gloves. Make sure that the batteries cannot be
short-circuited, thrown into the fire and be charged. There is a danger of explosion.
The contained lithium-ion battery is subject to the Dangerous Goods Legislation requirements. When being
transported, special requirements on packaging and labelling must be observed. For preparation of the item
being shipped, consulting an expert for hazardous material or a forwarding agency is required. Please also
observe possibly more detailed national and international regulations.
OPERATING DETERMINATIONS
This device is a lighting effect for creating decorative effects. It is designed for professional use, e.g. on
stage, in discotheques or theaters. Thanks to the integrated rechargeable battery it is ideally suited for
mobile applications.
The device can be operated with 100-240 V, 50/60 Hz mains voltage or via the integrated lithium ion
rechargeable battery (11.1 V, 10400 mAh) which can be recharged when connecting the device to the
mains. The IR remote control operates with a CR2032 button cell.
This device was designed for indoor use only. The device must never be installed in damp rooms (e.g.
bathroom, kitchen).
The integrated QuickDMX receiver for wireless reception of DMX512 signals operates in the 2.4 GHz ISM
range and is license-free and generally approved for operation in EU and EFTA countries.
Lighting effects are not designed for permanent operation. Consistent operation breaks will ensure that the
device will serve you for a long time without defects.
Do not shake the device. Avoid brute force when installing or operating the device.
When choosing the installation-spot, please make sure that the device is not exposed to extreme heat,
moisture or dust. There should not be any cables lying around. You endanger your own and the safety of
others!
This device must never be operated or stockpiled in surroundings where splash water, rain, moisture or fog
may harm the device. Moisture or very high humidity can reduce the insulation and lead to mortal electrical
shocks. When using smoke machines, make sure that the device is never exposed to the direct smoke jet
and is installed in a distance of 0.5 meters between smoke machine and device. The room must only be
saturated with an amount of smoke that the visibility will always be more than 10 meters.
The ambient temperature must always be between -5° C and +45° C. Keep away from direct insulation
(particularly in cars) and heaters.
The relative humidity must not exceed 50 % with an ambient temperature of 45° C. This device must only be
operated in an altitude between -20 and 2000 m over NN.
Never use the device during thunderstorms. Over voltage could destroy the device. Always disconnect the
device during thunderstorms.
The symbol
- - -m
determines the minimum distance from lighted objects. The minimum distance
between light-output and the illuminated surface must be more than the given value.
The housing must never touch surrounding surfaces or objects.
Make sure that the area below the installation place is blocked when rigging, derigging or servicing the
fixture.
