00110067, Version 1.0
11/16
SAFETY INSTRUCTIONS
Intended use –
This device is an LED projector for creating decorative effects. The product is only suitable
for decoration and not for household lighting. The product is fitted with LEDs that consume little power, have
an extremely long service life and develop little heat.
The product is designed for private use and is not intended for commercial use. For commercial use the
country-specific accident prevention regulations of the government safety organization for electrical facilities
must be complied with at all times.
Only use the product according to the instructions given herein. Damages due to failure to follow these
operating instructions will void the warranty! We do not assume any liability for any resulting damage.
We do not assume any liability for material and personal damage caused by improper use or non-
compliance with the safety instructions. In such cases, the warranty/ guarantee will be null and void.
Unauthorized rebuilds or modifications of the product are not permitted for reasons of safety and render the
warranty invalid.
Danger due to electricity –
To reduce the risk of electric shock, do not open any part of the product. Only
connect the product to a grounded wall socket that complies with the product specification voltage.
This product is not an outdoor product! Only for indoor use! Do not use this device near water or heat
sources. The recommended temperature range is -5 to +45 °C.
Do not touch the power adapter with wet hands as it may cause electric shock.
Cleaning of the product is limited to the surface. Make sure that moisture does not come into contact with
any areas of the terminal connections or mains voltage control parts. Only wipe off the product with a dry,
lint-free cloth. Before cleaning, disconnect the product from the mains.
If this product is no longer working properly or is visibly damaged, take it out of operation and consult your
local dealer. Do not attempt to repair the product yourself.
Danger to children –
This product is not a toy. Keep it out of the reach of children and pets. Do not leave
packaging material lying around carelessly.
Warning – risk of fire –
Do not expose this product to flammable materials. When setting up product,
always ensure a sufficient air circulation during operation. Keep a minimum distance of 50 cm to any
adjoining surfaces and never cover the air vents of the housing.
Warning – risk of eye damage –
Do not look directly at the light source! Persons with light-sensitive
epilepsy may suffer from epileptic seizures or fall unconscious.
Warning – risk of injuries –
Make sure that the product is set up or installed securely and cannot fall down.
Comply with the standards and rules that apply in your country.
About batteries –
Do not try to short-circuit, recharge, disassemble or heat batteries (danger of explosion!).
Remove the batteries if the device is not used for a longer period of time. Damaged/leaking batteries may
cause harm to your skin–use safety gloves.
EU Declaration of Conformity –
Steinigke Showtechnic GmbH hereby declares that this product AKKU Mini
BCW-4 is in compliance with the essential requirements and other relevant provisions of Directive
2014/53/EU. The complete Declaration of Conformity can be found at www.steinigke.de.
