EuroLite AKKU IP UP-4 QCL SPOT, Руководство пользователя

Страница: 33 / 44

00113517, Version 1.0 33/44
Battery status
The battery charging status is indicated on the display. The battery charging status is indicated by four
levels. If all four levels are lit, the battery is fully loaded. If only one level is lit, the red one, the battery is
going flat soon. In this state, the device can be operated for a few minutes. Then an emergency switch-off
deactivates the device to protect it from total discharge.
OPERATION
Switch on the device with the power switch. The unit requires a short initialization process and is then ready
for operation.
For a homogeneous and soft light, please use the enclosed diffuser plate. Simply fix this diffuser over the
lenses with the enclosed knurled head screws.
The display lights up and you can choose the desired mode via the buttons MENU, ENTER, UP and DOWN.
The device has two operating modes. It can be operated in stand-alone mode via the control board and the
EUROLITE IR-13 remote control or in DMX-controlled mode via a standard DMX controller and wireless via
QuickDMX with suitable wireless transmitter.
Control Board
The Control Board offers several features: you can easily set the starting address, run the pre-programmed
program or select a DMX channel mode.
The main menu is accessed by pressing Menu. Browse through the menu by pressing Up or Down. Press
Enter in order to select the desired menu. You can change the selection by pressing Up or Down. Press
Enter in order to confirm. You can leave every mode by pressing Menu. The functions provided are listed in
the following sections.
In order to deactivate or temporarily deactivate the keylock function, press the keys UP and DOWN at the
same time.
Menu
level 1
Menu level 2 Description
Addr d001-d512 DMX address setting (not controllable via remote control)
CHnd
3CH, 4CH, 6CH,
8CH, 10CH
Setting DMX channel mode (not controllable via remote control)
SLAU SL.AU Slave Mode (not controllable via remote control)
SP-- SP00-SP99
Select the desired program speed
S00 – S99 (increasing)
Pr-- Pr00-Pr30
Preset colors