00113517, Version 1.0
26/44
OPERATING DETERMINATIONS
This device is a lighting effect for creating decorative effects. It is designed for professional use, e.g. on
stage, in discotheques or theaters. Thanks to the integrated rechargeable battery it is ideally suited for
mobile applications.
The device can be operated with 100-240 V, 50/60 Hz mains voltage or via the integrated lithium ion
rechargeable battery (14.8 V, 7800 mAh) which can be recharged when connecting the device to the mains.
The IR remote control operates with a CR2032 button cell. The device was designed for indoor use only.
The integrated QuickDMX receiver for wireless reception of DMX512 signals operates in the 2.4 GHz ISM
range and is license-free and generally approved for operation in EU and EFTA countries.
This device is jet-proof (IP65) and therefore qualified for indoor and outdoor use. In order to maintain this
protection grade after opening the housing, any rubber sealings must be examined for damages and always
be correctly installed.
For outdoor use, the installer must always make sure to connect a rubber cable and an appropriate plug
H05RN-F or HO5RR-F. For installations in the ground, an underground power cable NYY must be used!
All valid instructions concerning the installation of cables outdoors or in the ground must be adhered!
The ambient temperature must always be between -5° C and +45° C. Keep away from direct insulation
(particularly in cars) and heaters.
The maximum relative humidity is 100 % with an ambient temperature of 25° C.
This device must only be operated in an altitude between -20 and 2000 m over NN.
Lighting effects are not designed for permanent operation. Consistent operation breaks will ensure that the
device will serve you for a long time without defects.
Do not shake the device. Avoid brute force when installing or operating the device.
There should not be any cables lying around. You endanger your own and the safety of others!
Never use the device during thunderstorms. Over voltage could destroy the device. Always disconnect the
device during thunderstorms.
The symbol
- - -m
determines the minimum distance from lighted objects. The minimum distance
between light-output and the illuminated surface must be more than the given value.
Make sure that the area below the installation place is blocked when rigging, derigging or servicing the
fixture.
Always fix the fixture with an appropriate safety bond.
The maximum ambient temperature
T
a
= 45° C must never be exceeded.
Operate the device only after having become familiarized with its functions. Do not permit operation by
persons not qualified for operating the device. Most damages are the result of unprofessional operation!
Never use solvents or aggressive detergents in order to clean the device! Rather use a soft and damp cloth.
Please use the original packaging if the device is to be transported. Make sure that you pack the device in
the original state.
Please consider that unauthorized modifications on the device are forbidden due to safety reasons!
Never remove the serial barcode from the device as this would make the guarantee void.
Содержание AKKU IP UP-4 QCL SPOT
Страница 1: ......
