EuroLite 70064545, Руководство пользователя

Страница: 22 / 32

22
•
EN
No. Element Function
1 PRESET A indicators Show the current intensity of the channels 1-24.
2 Channel faders 1-24 For adjusting the DMX values of channels 1-24 for the connected DMX
fixtures.
3 Flash buttons 1-24 These 24 buttons are used to bring an individual channel (1-24 ) to full
intensity (255).
4 PRESET B indicators Show the current intensity of the channels 25-48.
5 SCENE indicators Light up when corresponding scenes are active.
6 Channel faders 25-48 For adjusting the DMX values of channels 25-48 for the connected DMX
fixtures.
7 Flash buttons 25-48 These 24 buttons are used to bring an individual channel (25-48) to full
intensity (255).
8 BLIND button This function takes the channel out of the program in CHASE/SCENE
mode.
9 HOME button This button is used to deactivate the Blind function.
10 TAP SYNC button Press this button twice to adjust the running speed of the chase program.
11 FULL ON button When activated, all channel outputs will be set to maximum (255) and
blackout mode is disabled. This button is ideal for testing if a DMX signal
is fed to the DMX fixtures.
12 BLACK OUT button Sets all control channels to the value zero regardless of the FULL ON
button. The corresponding LED is flashing. Thus, it is possible to blackout
e. g. all DMX fixtures. As a basic setting, the Blackout function is activated
when switching on.
13 MASTER A fader This fader controls overall output of channels 1-24 (Preset A).
14 MASTER B fader This fader controls the scenes/chases in Chase/Scene and Single Preset
mode, and the overall output of channels 25-48 (Preset B) in Double
Preset mode.
15 FADE fader To adjust the fade time between the individual steps of a chase.
16 SPEED fader To adjust the chase speed.
Note: Both the TAP SYNC button and the SPEED fader can be used to set
the chase speed. The last input is valid.
17 AUDIO LEVEL fader This fader controls the sensitivity of the built-in microphone or of the audio
signal that is fed into the AUDIO input.
18 MASTER A button Not available.
19 PARK button Used to switch between SINGLE CHASE mode and MIX CHASE mode
when the CHASE/SCENES operating mode is selected.
• SINGLE CHASE: All chase programs will run in sequential order.
• MIX CHASE: All chase programs will run synchronously. In the event
that DMX values contradict each other, the higher value is valid.
20 HOLD button Press and hold down this button to hold all adjusted output values. Thus,
it is possible to maintain a current scene.
21 STEP button This button is used to go to next step when the Speed Fader is pushed to
the bottom or in Edit mode.
22 AUDIO button This button activates sound control mode.
23 DARK button Press and hold down this button to set all control channels to the value
zero regardless of the FULL ON button.
24 MODE SELECT button Selects the operating mode: Chase/Scene mode, Double Preset or Single
Preset.
25 PAGE/REC CLEAR button • To switch the flash buttons between the four pages. The LEDs above
the button indicate which page is selected.
• Press this button and the RECORD button to clear the internal memory.