00029608.DOC, Version 1.1
10/10
The earth has to be connected!
If the device will be directly connected with the local power supply network, a disconnection switch with a
minimum opening of 3 mm at every pole has to be included in the permanent electrical installation.
The device must only be connected with an electric installation carried out in compliance with the IEC-
standards. The electric installation must be equipped with a Residual Current Device (RCD) with a maximum
fault current of 30 mA.
For luminaires with 72 LEDs: In order to connect the device to the mains, you have to first install an
appropriate transformer.
Connect the device to the mains with the transformer.
CLEANING AND MAINTENANCE
Disconnect from mains before starting maintenance operation!
DANGER TO LIFE!
We recommend a frequent cleaning of the device. Please use a soft lint-free and moistened cloth. Never use
alcohol or solvents!
There are no serviceable parts inside the device. Maintenance and service operations are only to be carried
out by authorized dealers.
Should you need any spare parts, please use genuine parts.
Should you have further questions, please contact your dealer.
TECHNICAL SPECIFICATIONS
Luminaire:
36 LEDs:
72 LEDs:
Power supply:
230 V AC, 50 Hz ~
12 V AC, 50 Hz ~
Power consumption:
2 W
4 W
Protection grade IP:
IP 54
IP 54
Maximum ambient temperature
T
a
:
45° C
45° C
Maximum housing temperature
T
B
(steady state):
60° C
60° C
Min. distance from flammable surfaces:
0.5 m
0.5 m
Min. distance to lighted object:
0.1 m
0.1 m
Fuse:
F 5 A, 250 V
F 5 A, 250 V
Dimensions (LxWxH):
141 x 120 x 241 mm
141 x 120 x 241 mm
Mounting dimensions (LxH):
122 x 222 mm
122 x 222 mm
Weight:
2.4 kg
2.4 kg
Please note: Every information is subject to change without prior notice. 06.08.2007 ©