19
•
EN
MOUNTING
These products are designed for overhead rigging to a wall or ceiling with the mounting brackets. They can also
be fastened to a truss using appropriate clamps. To align the units, release the fixation screws at the mounting
brackets, adjust the desired inclination angle and retighten the fixation
screws.
WARNING!
Risk of injury caused by falling objects
Devices in overhead installations may cause severe injuries when crashing down. Make sure that the
device is installed securely and cannot fall down. Make sure that the installation complies with the
standards and rules that apply in your country, in particular EN 60598-2-17.
•
The installation of the device has to be built and constructed in a way that it can hold 10 times the weight for
1 hour without any harming deformation.
•
The device must be additionally secured with e.g. an appropriate safety bond. Fasten the safety bond in such a
way that, in the event of a fall, the maximum drop distance of the device will not exceed 20 cm. This secondary
safety attachment must be constructed in a way that no part of the installation can fall down if the main
attachment fails.
•
You must only use safety bonds and quick links complying with DIN 56927, shackles complying with DIN EN
1677-1 and BGV C1 carbines. The safety bonds, quick links, shackles and the carbines must be sufficiently
dimensioned and used correctly in accordance with the latest industrial safety regulations (e. g. BGV C1,
BGI 810-3).
Safety bond
Truss clamp
Safety bond
Safety bond
Truss clamp
Truss clamp
Truss clamp
Mounting
bracket
Mounting
bracket
Mounting
bracket
Mounting
bracket
