50520300_V_1_0.DOC
12/23
Off
Off
BI
Blinking light
When the device is switched on, the red LED lights up.
OPERATION:
EL Wire 2m
In order to design the desired patterns, draw the form onto the surface or wrap the EL Wire around the
desired form and attach the EL Wire with adhesive tape or a few drops of glue.
Open the battery cover and remove it.
If replacing the batteries, remove the old batteries from the battery compartment. Only replace complete
battery-sets.
Leaky or damaged batteries might cause cauterisation when in contact with the skin; therefore, use suitable
protective gloves.
Caution!
Danger of explosion when battery is replaced improperly.
Only replace by the same type or similar types recommended by the manufacturer.
Remove empty batteries in accordance with the instructions of the manufacturer.
Insert the batteries and make sure that the poles are correct.
Replace the battery cover and close it.
Via the controller with the 3-step button, you can switch between 2 blinking-modes, on and off. When the
device is switched on, the red LED lights up. In this case, the power supply is sufficient.
When the batteries are getting weaker, the red LED gets weaker as well. In this case, the batteries have to
be replaced.
If the red LED does not light up when switching on, there are either no batteries inserted or the poles are
wrong.
If the device will not be used for a longer period of time, remove the batteries in order to avoid battery
leakage.
In order to have a long battery life, you should only use alcaline batteries.
BATTERY DISPOSAL NOTICE
Please dispose of old and used batteries properly.
Batteries are hazardous waste and should not be disposed of with regular domestic waste!
Please take old and used batteries to a collection center near you.
CLEANING AND MAINTENANCE
Disconnect from mains before starting maintenance operation!
DANGER TO LIFE!
We recommend a frequent cleaning of the device. Please use a moist, lint-free cloth. Never use alcohol or
solvents!
Содержание 50520300
Страница 23: ...50520300_V_1_0 DOC 23 23...