50502955_V_1_0.DOC
19/43
INSTALLATION
The LED Neon Flex
s
ystem is a versatile and user friendly linear lighting device; it can be cut and bent and
formed in the field and easily installed on flat surfaces of varied materials, such as wood, plastic, steel, or on
walls to form all kinds of pattern according to your design.
Procedure:
Step 1:
Unpack the lighting chain.
Step 2:
In order to design the desired pattterns, draw the form onto the surfach and attach the mounting-
channels.
Step 3:
Insert the light tubes into the m
ounting
channels with the illum
inating side upwards.
Step 4:
Connect the light tubes. Make sure the poles of the connceting pins are correct (see system
overview). The tube is waterproof (IP 44). Nevertheless, you have to insulate the connectors and
the power
connector with the supplied heat shrink tubes for outdoor
use.
Cutting marks
WARNING!
Only cut the tube where marked.
The lighting tube may only be cut on the indicated mark. (see „Technical Specifications“).
Mounting channel
100 cm aluminum channel 5 cm aluminium channel
