9
•
EN
IMPORTANT SAFETY INSTRUCTIONS
WARNING!
Please read the safety warnings carefully and only use the product as describe in this manual to avoid
accidental injury or damage.
•
The rotating mirror ball mount can be fitted to stands with a tube diameter of 35 mm and is suitable for mirror
balls with Ø30 cm or Ø50 cm in size.
•
This device is designed for professional use in the field of event technology, e.g. on stage. Only use the product
according to the instructions given herein. Damages due to failure to follow these operating instructions will void
the warranty! We do not assume any liability for any resulting damage.
•
Unauthorized rebuilds or modifications of the product are not permitted for reasons of safety and render the
warranty invalid.
Danger due to electricity
•
The device is suitable for indoor use only. Do not use it outdoors. Never expose it to rain or moisture. Do not
store it in rooms exposed to moisture.
•
To reduce the risk of electric shock, do not open any part of the device. There are no serviceable parts inside the
device.
•
Only connect the device to a properly installed mains outlet. The outlet must be protected by residual current
breaker (RCD). The voltage and frequency must exactly be the same as stated on the device. If the mains cable
is equipped with an earthing contact, then it must be connected to an outlet with a protective ground. Never
defeat the protective ground of a mains cable. Failure to do so could result in damage to the device and possibly
injure the user.
•
The mains outlet must be easily accessible so that you can unplug the device quickly if need be.
•
Never touch the mains plug with wet or damp hands. There is the risk of potentially fatal electric shock.
•
The mains cable must not be bent or squeezed. Keep it away from hot surfaces or sharp edges.
•
Never pull the mains cable to disconnect the mains plug from the mains outlet, always seize the plug.
•
Unplug the device during lighting storms, when unused for long periods of time or before cleaning.
•
Do not expose the device to any high temperatures, direct sunlight, dripping or splashing water, strong
vibrations or heavy mechanical stress.
•
Do not place any objects filled with liquids on the device.
•
Do not place any open sources of fire, such as burning candles, on or directly next to the device.
•
Make sure that objects cannot fall into the device, in particular metal parts.
•
Only have repairs to the device or its mains cable carried out by qualified service personnel. Repairs are required
when the device or the mains cable is visibly damaged, liquid has been spilled or objects have fallen into the
device; when the device has been exposed to rain or moisture, has been dropped or malfunctions occur.
•
Cleaning of the device is limited to the surface. Make sure that moisture does not come into contact with any
areas of the terminal connections or mains voltage control parts. Only wipe off the product with a soft lint-free
and moistened cloth. Never use solvents or aggressive detergents.
Warning – risk of injuries and material damage
•
This product is not a toy. Keep it out of the reach of children. Do not leave packaging material lying around
carelessly.
•
Devices in overhead installations may cause severe injuries when crashing down! Make sure that the mount and
mirror ball are installed securely and cannot fall down. Do not exceed the maximum load capacity specified of
the bracket.
•
For commercial use the country-specific accident prevention regulations of the government safety organization
for electrical facilities must be complied with at all times.
•
Make sure that no side forces can impact on the installation and the rotation of the mirror ball is never slowed
down or stopped by decoration material etc.
•
When handling mirror balls always wear gloves. Observe the danger of cutting and splintering by glass!
•
Handle the product with care; it can be damaged by impacts, blows, or accidental falls, even from a low height.
•
Before taking into operation, check upon possible damages. If defective, the bracket must not be taken into
operation.
