Eurogard ServiceRouterV3 Скачать руководство пользователя страница 25 | Manualshive

Страница: 25 / 74

Eurogard ServiceRouterV3 Скачать руководство пользователя страница 25

Configuration options

of the ServiceRouterV3

Achtung

Please enter URLs as https://192.168.155.1 in your browser.

The default port for HTTPS is 443. If you wish to change this port, you must also inform your browser. Add a
colon, followed by the port number between server address and directory path.

Beispiel 4.2. URL with HTTPS on changed port

If your new HTTPS port is, for example, 4444, the URL has to be entered as follows:

https://serviceserver.example.com:4444/cgi-bin/webif/admin/system.sh or

https://192.168.155.1:4444/cgi-bin/webif/admin/system.sh

Default: 443

3. Web Access/WAN

This section describes the allocation of the Internet connection for the ServiceRouterV3.

3.1. WAN media

Please select the type of connection at this point. Depending on the type of device, you can choose between
Ethernet, WiFi, LTE or DSL per PPPoE.

3.1.1. Ethernet

Select the configuration of the Internet connection of the device. You can choose between DHCP and manual
specification of network parameters.

Please note that for DSL access, at this point in time, the device only supports automatic configuration via DHCP.

3.1.1.1. Ethernet - DHCP/dynamic

All data required for connection setup is received dynamically from a DHCP server in the connected network.

3.1.1.2. Ethernet - static

The input screen holds all necessary parameters. Specification of the default gateway and DNS server is supported
only for the entry of an IP. The use of a second DNS server is optional.

19

«
...
23
24
25
26
27
...
»

Содержание ServiceRouterV3











































































Отзывы:

Нет отзывов