16
Cleaning
Quick installation guide_Conveyor system MB-flex Q N_20221114_EN.docx
4.3
Preparation
Carry out the following work steps:
1. Switch off the conveyor system.
▼
No voltage is present at the conveyor system.
2. Close the pneumatic supply at the main valve and secure it with a personal padlock.
3. Secure the main switch on the control cabinet with a personal padlock.
The conveyor system is prepared for cleaning.
✓
Ready.
4.4
Execution
Prerequisite:
▪
Conveyor system is switched off and secured against being switched on again
▪
Conveyor system is prepared for cleaning
Carry out the following work steps:
1. Remove residues of conveyance goods.
2. Remove contamination without damaging the surface.
3. Remove contamination with cleaning agents.
4. Rinse off solution with water under low pressure.
5. Rub surface to dry it.
✓
Ready.
Contact euroflex GmbH for instructions on cleaning any further contaminants.