10
Assembly
Quick installation guide_Conveyor system EURO-flex Al_20221111_EN.docx
Information
Data
Designation or value
Personnel
Maintenance personnel
Personal protective equipment
Protective work clothing
Protective gloves
Safety shoes
Tools, aids
Mitre cutter
Steel pin (Ø 4 mm x approx. 200 mm long)
Hammer
Carpet knife
Assembly tool
Drill and drill bit ø 3.4mm
WARNING
Risk of injury and serious damage to property due to improper installation!
A lack of knowledge about the system and experience in assessing and averting residual risks
during proper assembly can result in injury and even death.
»
Before working on the system, turn it off and guard it from being switched back on.
»
Prior to working in the system area, empty or clear the system.
»
Regularly remove product residues and splitters from the entire system area.
»
Check that the screw connections on all load-bearing and moving parts are tightened correctly
»
Check correct function of bearings and links.
»
Check the function of the safety devices.
»
Wear appropriate personal protective gear in the system area.
Prerequisite:
▪
System is switched off and safeguarded against being restarted.
3.2
Assembly the slide rails on the link chain conveyor
Observe the following during assembly:
▪
Install the slide rails in a number of continuous lengths where possible.
▪
In areas with high loads, the slide rails must be separated to enable expansion. Separation is
required at bending wheels, deflection units and drive units.
▪
Never connect slide rails in horizontal or vertical sliding bends.
▪
Avoid slide rail connections at the connection points of the guide profiles.
1. Check the slide rail for damage.
ǃ
Only use undamaged slide rails.
2. Chamfer the slide rail at the start (viewed in running
direction).