www.euroboor.com
21
4. Using the machine
4.1 Turning the machine On / Off
The EBS.500 is equipped with both a power switch and
an On-/Off trigger switch. By using the power switch,
the machine can be turned on into stand-by mode. After
that the machine can be controlled by using the on-/off
trigger switch. Please follow the steps below for turning
on-/off- the machine.
4.1.1 Turning the machine on
1.
Make sure the machine is in its designated position and standing stable.
2.
Make sure the machine is without any damage, and all screws and bolts are tightened.
3.
Make sure the arm lock pin is unlocked.
4.
Plug in the machine to the power source.
5.
Push the power button – green (I) – on top of the motor housing.
6.
Set the machine speed to the desired speed by using the speed adjustment knob. Refer
to paragraph
“4.2 Adjusting the machine speed”.
7.
Press the on-off trigger switch. The machine will start running.
4.1.2 Turning the machine off
1.
Unleash the on-off trigger switch and wait for the machine to come to a complete stop.
2.
Push the power off button – red (O) – on top of the motor housing.
3.
Unplug the machine from the power source.
Image 4-1
